CB-1750
The Clean Burn Model CB-1750 produces approximately 175,000 BTU/hr. and is the smallest of the low profile designs, making it ideal for numerous applications and convenient installations. As a broad guideline, the Model CB-1750 is suitable for facilities generating smaller quantities of waste oil annually
MODEL INFORMATION
FEATURES
Engineered from the ground up to burn waste oils
Patented heat exchanger generates more heat
Unique non-welded flue tubes for longer service life
Advanced burner preheats oil to optimize combustion
Swing-away burner and door make service easy
Longest cleaning interval of all units in its class
Lower stack temperatures, higher heat output
Automatic flow control means no fuel adjustment required
Ideal for unit heating or with a Clean Burn Recycling Center
Unequaled service and support from Clean Burn Distributors
SPECS
| Model CB-1750 | Specs. |
|---|---|
| *Maximum BTU/hour | 175,000 (51.25 kW) |
| *Maximum oil consumption | 1.2 GPH (4.54 L/h) |
| Fuels | Used oils: Crankcase,ATF, hydraulic Fuel oils: #2, #4, and #5 fuel oil |
| Air flow output (CFM) | Unit heater 1700 Central furnace (ducted) 0.25 SPWC (in.) 1500 0.30 SPWC (in.) 1400 |
| *Air compressor required | 2.0 CFM @ 25 PSI (3.4 m3/h @ 1.7 bar) |
| Stack Size | 8 inch dia.(20cm dia.) |
| Furnace Dimensions, Assembled | 83.25” L x 29.25 W x 31.5 H (219cm x 74cm x 79cm) |
| Approx. Weight (uncrated) | 406 pounds (182.7 kg) |
| Electrical Requirements | 115 VAC 60 Hz, single phase 30 A circuit breaker |
*Values indicated above are nominal. Actual values will vary depending on fuel and installation.
RESOURCES
